Disinfectant for tools and instruments (concentrate) 1 litres

Product information "Disinfectant and cleaning solution for instruments + burs, 1000 ml"
ready to use, alcohol-free good material compatibility - with corrosion protection bactericidal, yeasticidal, limited virucidal suitable for ultrasonic baths VAH listed

Areas of application: Ready-to-use combination preparation for disinfection and cleaning of instruments and rotating instruments. Can be used in an ultrasonic bath. Spectrum of action and exposure times: Ready-to-use solution! Do not dilute!
Recommended use for instrument disinfection: bactericidal, yeasticidal according to VAH guidelines: 5 minutes, limited virucidal: 5 minutes.
Application: Disinfectant cleaning using the immersion bath process: If necessary, after rough cleaning, place instruments in the working solution while they are open and clean them mechanically where necessary. All surfaces and cavities must be completely wetted with the working solution. After the exposure time has elapsed, rinse the instruments thoroughly with demineralized water (deionized water) and reprocess them further. Disinfectant cleaning in the ultrasonic bath process: The disinfectant and cleaning solution can be used to increase the cleaning performance in common ultrasonic baths made of stainless steel. >span class="jCAhz ChMk0b">Do not exceed the sonication time according to the manufacturer's instructions and temperatures of 40 °C. After the exposure time has elapsed, rinse the medical devices thoroughly with demineralized water (deionized water) and process them further.
>span class="jCAhz ChMk0b">For final disinfection, prepare medical devices from risk class semicritical A with a virucidal disinfectant. >span class="jCAhz">
Composition: 100 g of solution contains: 0.28 g of N, N-didecyl-N-methyl-poly-(oxyethyl)-ammonium propionate, 0.19 g of alkylpropylenediamine-1,5-bisguanidinium diacetate.
Material compatibility: Application is not recommended for the following materials: brass, aluminum, polystyrene (PS), polysulfone (PSU), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), acrylonitrile butadiene styrene (ABS), polycarbonate (PC), polyurethane (PUR), silicone. Material compatibility is only limited for steel drills in the material group ISO 310 (hard steel), as this depends on the alloy used by the manufacturer.

Use disinfectant carefully. Always read label and product information before use.